DeskCNC-in-a-box

DeskCNC-in-a-box.

This item includes a DeskCNC controller card, installed in a metal enclosure. It is assembled and can plug into Step and Direction controlled, stepper and servo driver boxes, used with parallel port software such as TurboCNC, EMC, and Mach2.

The box has a green power indicator, and jacks for power and lim/probe input.The control input is from a personal computer running DeskCNC software through a serial port, and the output is a DB-25 female connector.

The output connector is wired up with the standard EMC step and direction pinout:

2-X step 3-X dir 4-Y step 5-Y dir 6-Z step 7-Z dir 8-A step 9-A dir

Discussion about seting up the DeskCNC in a box with a Sherline EMC machine  Sherline/EMC

Included with the package are the following:

• DeskCNC-in-a-box
• 5vdc 1 amp regulated power supply
• 10 ft. Serial cable
• 6 ft. parallel cable

A DeskCNC license is required to purchase the DeskCNC-in-a-box.  Please enter your license code when purchasing.  Enter NEW if purchasing a DeskCNC-in-a-box with a new DeskCNC software license. Lead time a week to 10 days.

Additional Information