Browse Categories
Shopping Cart
Your cart is empty.

Cnc Systems - SYS-3A-Select Sherline CNC lathes with system purchases

Sys-3
Your Price: Starting at $999.00
Manufacturer: IMService
Manufacturer Part No: Configurator

Product Options

Systems and Kits:
Sherline CNC-Ready Lathes:

Personalization

* denotes required field

Inch or Metric Units?*

Select a CNC ready Sherline lathe and the purchase price will be calculated, including the bundled discount.   The systems are ready to bolt on closed loop, Servo CNC system controller, with brushed DC servo motors, cables, assembled enclosure and software.  Sherline CNC ready mills and lathes available at approximately 15% discount with system purchase. Systems are assembled in a quality metal enclosure with servo reset, lighted power breaker, enable and indicator lamp, and e-stop controls. This item normally ships approcximately 1-2 weeks after order receipt.  Sherline lathes are shipped to our facility in South East Michigan and then dispatched from there.  The Servo systems are assembled to order and are usually completed at about the same time as receipt of the Lathe at our facility.

Pictures of the Sherline CNC ready lathes can be seen in the Sherline catetgory at the left.

Cad-Cam software, Electronic Threading kit, and quick change tool holders can be ordered at the bottom of this page.

Sherline 4000A-CNC lathe with globe sevo motors installed. Red handles shown on the motor assembly are Sherline parts, and are not included with this purchase.

Model 4000 lathe: Standard equipment for the basic model 4000 (metric 4100) lathe includes a powerful 90 VDC motor with electronic speed controller, a 2.75" (70mm) x 6.0" (152mm) crosslide, 15" (381mm) steel bed to allow 8" (203mm) between centers, standard 1-5/8" (41mm) laser engraved aluminum handwheels, pulleys, belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet. This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned over the bed. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed. Inch or metric screws available inch screw 20 tpi (.050 inch per rev) and metric screw is 1/mm pitch (.0397 inch per rev)

-4000-A options

• 1041 2.5" 3-jaw self-centering chuck
• 1072 Jacobs 1/4" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt

-4000-B options include the -A options plus the following:

• 1074 Steady rest
• 1191 Live Center
• 3002 Cutoff tool and holder
• 3007 1/4" HSS 3-piece cutting tool set (RH, LH, boring)
• 3020 Sherline 5/32" T-driver
• 3021 3-piece center drill set

Model 4400 lathe: In addition to items shown for the model 4000 lathe, , the model 4400 lathe has a 24" (610mm) bed that has 17" (431mm) between centers, a 2.5" (63mm) resettable “zero” handwheel on the leadscrew, two 2" (51mm) resettable “zero” handwheels on the crosslide and feed screw and a rocker tool post (P/N 3057) substituted for the standard tool post used on the shortbed lathes.

-4400-A options

• P/N 1040 3.1" 3-jaw self-centering chuck
• P/N 1069 Jacobs 3/8" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt

-4400-B options include the 4400-A options plus the following:

• 1074 Steady rest
• 1191 Live Center
• 3002 Cutoff tool and holder
• 3007 1/4" HSS 3-piece tool set (RH, LH, boring)
• 3020 Sherline 5/32" T-driver
• 3021 3-piece center drill set

Select the lathe model and option package with your system purchase, to take advantage of the 15% discount.  Click buy to add your configuration to the shopping cart.  The total checkout price will reflect the options selected. After the desired combination is entered in your shopping cart, enter your Zip/postal code to calculate shipping charges for US and Canadian destinations.  Other international customers please contact our office for voltage variations and international shipping options.

 

Additional Information

Additional information

Related Products

Sherline Threading kit
Lathe Encoder kit
Your Price: $169.00
Lathe Encoder kit
Kit with parts/software developed to add threading to a Sherline lathe with DeskCNC controller.

Product Reviews

(0 Ratings, 0 Reviews)